Measurement Solutions for Carbon Capture, Utilization & Storage
Connect gas moisture, gas flow, process temperature, and water quality to the actual process conditions, installation, interfaces, and lifecycle requirements across Carbon Capture, Utilization & Storage.
Measurement priorities across Carbon Capture, Utilization & Storage
Carbon Capture, Utilization & Storage facilities combine CO2 capture, compression, transport, and injection with different process, quality, environmental, and reliability objectives. The measurement system must therefore be selected around the actual stream or asset, expected range, operating conditions, installation environment, required response, and the decision the data will support.
Blue Dragon Technology reviews the application before recommending equipment. The review covers the measurement objective, process or sample conditions, utilities, hazardous-area and environmental requirements, sample handling where relevant, control-system interfaces, calibration or verification, documentation, commissioning, and lifecycle support. Product relationships on this page identify relevant starting points; they do not replace application qualification.
Measurement challenges in this industry
Gas moisture
Define the gas composition, pressure basis, expected moisture or dew-point range, contaminants, sample handling, and verification method before selecting a measurement approach for Carbon Capture, Utilization & Storage.
gas flow
Confirm pipe geometry, gas composition, pressure, temperature, velocity range, installation access, flow profile, and required measurement basis for Carbon Capture, Utilization & Storage flow duties.
process temperature
Define the measurement location, operating temperature, mechanical attachment or insertion, materials, routing, response, maintainability, and plant interfaces for Carbon Capture, Utilization & Storage.
water quality
Qualify the water matrix, expected range, fouling or solids load, sampling arrangement, cleaning strategy, calibration or comparison basis, and reporting objective in Carbon Capture, Utilization & Storage.
Typical process areas and streams
- CO2 capture
- compression
- transport
- injection
- vent systems
Applications used in this industry.
Trace Moisture Measurement in Gases
Continuous measurement of trace moisture in industrial gases.
Explore →
Water Dew Point Measurement
Direct or calculated water dew point measurement in gas streams.
Explore →
Gas Moisture Concentration Measurement
Moisture concentration reporting in ppmV, mg/m3 or configured units.
Explore →
Natural Gas Quality Monitoring
Dew point/moisture measurements supporting natural-gas quality control.
Explore →
Hydrogen Moisture Monitoring
Trace moisture monitoring in hydrogen service after compatibility review.
Explore →
Relevant measurement capabilities.
Explore the permanent Blue Dragon capability areas associated with this industry or application.
Moisture & Dew Point Measurement Series
Online, field, and portable instruments for trace moisture, water dew point, hydrocarbon condensation temperature, gas dehydration, and gas-quality verification.
Explore series →Instruments connected to this industry.
Available
FAS-SW Trace Moisture & Dew Point Transmitter
Compact 4-20 mA water-dew-point transmitter for inert, aggressive, and hydrogen-containing gases, with calibrated ranges extending to -100 °C and pressure capability up to 300 bar.
View instrument
Available
FAS-W Online Moisture & Dew Point Analyzer
Online chilled-mirror gas-moisture analyzer with versions for water dew point, moisture concentration, or both, plus integrated absolute-pressure measurement, 4-20 mA, Modbus RTU, and alarm outputs.
View instrumentRelated industries.
Natural Gas & LNG
Measurement solutions for gas processing, sweetening, liquefaction, LNG quality, gas flow, utilities, and materials verification.
Explore →
Petrochemicals
Measurement systems for petrochemical feedstocks, reaction processes, fired equipment, utilities, effluent, gas flow, and material quality.
Explore →
Chemical Processing
Application-focused instrumentation for Chemical Processing, covering Trace moisture, H2S and sulfur, TOC, flow, and multipoint temperature across Reactors, columns, specialty gas systems, and utilities.
Explore →
Fertilizers & Chemicals
Analytical and engineered measurement systems for feedstocks, process gases, reactors, utilities, effluent, flow, and material quality.
Explore →
Hydrogen & Syngas
Application-focused instrumentation for Hydrogen & Syngas, covering Ultra-trace moisture, dew point, gas flow, H2S where relevant, and temperature across Electrolysis, reforming, purification, and compression.
Explore →
Industrial Gases
Application-focused instrumentation for Industrial Gases, covering Trace and ultra-trace moisture, gas flow, quality control, and laboratory verification across Bulk gases, specialty gases, purification, and filling.
Explore →
Biogas & Renewable Gas
Application-focused instrumentation for Biogas & Renewable Gas, covering H2S, moisture, gas flow, and pipeline-quality verification across Digesters, upgrading, compression, and injection.
Explore →
Industrial Manufacturing
Application-focused instrumentation for Industrial Manufacturing, covering Surface temperature, exhaust gas flow, XRF material verification, gas flow, and XRF alloy verification across Engine test cells, exhaust, rotating equipment, and materials QC.
Explore →Industry questions.
Which measurements should be prioritized in Carbon Capture, Utilization & Storage?
Start with the operating or quality decision that needs better information. Define the process or sample, normal and upset conditions, required range, response, accuracy, interfaces, and reference basis before selecting a technology.
Can one instrument configuration cover every Carbon Capture, Utilization & Storage application?
No. Product relationships identify relevant technologies, but sample composition, process conditions, installation, range, certification, utilities, and required method can change the correct configuration.
What information should be provided for an application review?
Provide the process/unit, measurement objective, sample or equipment conditions, range, pressure and temperature, area classification, utilities, I/O requirements, documentation, project stage, and required schedule.
Can Blue Dragon support integration and commissioning?
Yes. Project scope can include application review, system boundaries, sample conditioning or mounting, interfaces, FAT/SAT, commissioning, training, spares, and lifecycle support as defined in the quotation.
Discuss your Carbon Capture, Utilization & Storage measurement requirement.
Share the process or unit, measurement objective, operating conditions, required range, project location, utilities, interfaces, documentation requirements, and schedule for your Carbon Capture, Utilization & Storage project.