Industrial Measurement Applications
Explore Blue Dragon solutions according to the parameter, process stream, sample, operating condition, or measurement objective that defines the application.
Find solutions by application.
Each page explains what is measured, why it matters, where it is used, the main selection considerations, and the available instrument platforms.
Sulfur Analysis Series
Online analyzers for total sulfur, hydrogen sulfide, sulfur ratio, and sulfur recovery unit process monitoring.
Online Total Sulfur Measurement
Continuous total-sulfur measurement for representative liquid or gas samples in process, product-quality, and treatment applications.
Explore →
Total Sulfur in Liquid Hydrocarbon Streams
Total sulfur in gasoline, diesel, naphtha, kerosene, gas oil and similar qualified liquids.
Explore →
Hydrogen Sulfide Measurement
Specific H2S measurement for gas treatment, product quality, process monitoring, and safe handling applications.
Explore →
Portable H2S Field Verification
Portable H2S verification, troubleshooting and temporary field measurement.
Explore →
Sulfur Recovery & Tail Gas Monitoring
Process-gas measurement for sulfur recovery, tail-gas treatment, sulfur-ratio control, and plant optimization.
Explore →
H2S / SO2 Ratio Measurement
Measurement and calculation of H2S-to-SO2 ratio in SRU tail gas.
Explore →
Sulfur Ratio / Air-Demand Control
Sulfur-ratio measurement supporting Claus air-demand control.
Explore →Moisture & Dew Point Measurement Series
Online, field, and portable instruments for trace moisture, water dew point, hydrocarbon condensation temperature, gas dehydration, and gas-quality verification.
Trace Moisture Measurement in Gases
Continuous measurement of trace moisture in industrial gases.
Explore →
Ultra-Trace Moisture Measurement in Gases
Coulometric or equivalent ultra-trace moisture measurement at very low concentration.
Explore →
Water Dew Point Measurement
Direct or calculated water dew point measurement in gas streams.
Explore →
Hydrocarbon Condensation Temperature Measurement
Hydrocarbon dew point/condensation temperature in natural gas.
Explore →
Gas Moisture Concentration Measurement
Moisture concentration reporting in ppmV, mg/m3 or configured units.
Explore →
Natural Gas Quality Monitoring
Dew point/moisture measurements supporting natural-gas quality control.
Explore →
Hydrogen Moisture Monitoring
Trace moisture monitoring in hydrogen service after compatibility review.
Explore →
Portable Dew Point Verification
Portable field verification of installed dew-point instruments and process gas.
Explore →
Hygrometer Verification and Comparison
Comparator/reference checks for permanently installed hygrometers.
Explore →Water Quality & Organic Carbon Series
Online and laboratory analyzers for organic carbon, oil-in-water, turbidity, wastewater, and high-purity water measurement.
Total Organic Carbon Measurement
TOC measurement for water-quality control, contamination detection, treatment monitoring, process investigation, and laboratory analysis.
Explore →
High-Purity Water TOC Monitoring
TOC measurement for purified, ultrapure, pharmaceutical, biotechnology, semiconductor, and controlled high-purity water systems.
Explore →
Oil-in-Water Monitoring
Online oil-in-water measurement for produced water, process water, treatment systems, wastewater, and discharge-related monitoring.
Explore →
Turbidity & Suspended Solids Monitoring
Optical monitoring of turbidity and suspended-material changes across water treatment, process water, wastewater, reuse, and discharge systems.
Explore →Elemental Analysis & Materials Characterization
X-ray fluorescence instruments for elemental composition, material identification, quality control, field screening, and industrial laboratories.
Elemental Composition Analysis
XRF measurement of elemental composition in metals, minerals, powders, solids, filters, soils, and prepared samples.
Explore →
Material Identification & Verification
XRF-based identification and verification of alloys, metals, components, incoming materials, maintenance replacements, and recycled material.
Explore →
Positive Material Identification (PMI)
Alloy/material PMI using suitable calibration and configuration.
Explore →
Mining & Geochemical Screening
Field and laboratory XRF screening for exploration, ore, minerals, grade control, geochemistry, soils, concentrates, and mine-site decisions.
Explore →
Ore Grade / Concentrate Analysis
Elemental analysis of ores, concentrates and mineral products.
Explore →
Lithium / Critical-Mineral Screening
Field screening for critical-mineral exploration subject to calibration.
Explore →
Cement / Glass / Ceramics Analysis
Elemental composition of cementitious, glass and ceramic raw materials/products.
Explore →
RoHS / Hazardous-Substance Screening
Screening for regulated elements with suitable application mode.
Explore →
Scrap & Recycling Material Sorting
Rapid XRF screening/identification for recycling streams.
Explore →Temperature Measurement Series
Engineered temperature-measurement assemblies manufactured by MESIT, Italy, and supplied and supported by Blue Dragon Technology.
Tube-Skin Temperature Measurement
Engineered thermocouple measurement of external tube-wall temperature in fired heaters, boilers, reformers, furnaces, and thermal equipment.
Explore →
Multipoint Temperature Profiling
Engineered measurement of temperature at multiple elevations or positions in reactors, columns, vessels, catalyst beds, and process equipment.
Explore →
Gasket-Mount Surface Temperature Measurement
Engineered surface-temperature measurement using a gasket-mounted thermocouple arrangement for suitable flanged equipment and process connections.
Explore →
Nuclear In-Core Temperature Measurement
Project-engineered temperature-measurement systems for defined nuclear in-core and reactor applications with plant-specific qualification and documentation.
Explore →Blue Dragon BDT Flow Measurement Series
Ultrasonic gas-flow measurement instruments engineered and manufactured by Lauris Technologies, Canada, and supplied and supported by Blue Dragon Technology.
Industrial Gas Flow Measurement
Ultrasonic gas-flow measurement for inline and insertion applications across natural gas, process gas, fuel gas, flare, vent, and high-temperature services.
Explore →
Extreme-Temperature Gas Flow Measurement
Gas-flow measurement at cryogenic or high process temperatures.
Explore →
Wet / Dirty Gas Flow Measurement
Ultrasonic flow measurement in gas with liquid/solid contamination after review.
Explore →
Custody-Transfer / Fiscal Gas Metering
Fiscal/custody gas measurement only when selected configuration and calibration qualify.
Explore →Start with the measurement requirement—not only the instrument.
Blue Dragon reviews the measurement objective, sample or process stream, expected range, operating environment, installation conditions, applicable methods, maintenance expectations, and project timeline before recommending a configuration.
- Measurement objective and required performance
- Sample phase, composition, and possible interferences
- Temperature, pressure, hazardous-area, and installation conditions
- Calibration, maintenance, documents, and lifecycle support
Not sure which measurement solution fits your process?
Provide the process stream or sample, expected range, operating conditions, project location, applicable methods, and desired timeline.